Giỏ hàng của bạn

Số sản phẩm: 0

Thành tiền: 0

Xem giỏ hàng

Sản phẩm mới

Thống kê

Đang online 4
Hôm nay 10
Hôm qua 24
Trong tuần 10
Trong tháng 350
Tổng cộng 12,008

Cảm biến điểm sương FA 550 - CS Instrument Việt Nam

Mô tả: Đo điểm sương trong hệ thống khí nén sau máy sấy hấp phụ, máy sấy màng hoặc máy sấy lạnh Đo độ ẩm dư và đo điểm sương trong các loại khí như: oxy, nitơ, argon, hydro, khí tự nhiên, khí sinh học
Giá bán: Vui lòng gọi
Tình trạng: Mới 100%
Xuất xứ: CS INSTRUMENT
Ngày đăng: 08-10-2019

Chi tiết sản phẩm

Đại lý CS Instrument tại Việt Nam

FA 550 | Cảm biến điểm sương CS Instrument

Robust dew point sensor for compressed air and gases

The FA 550 is ideally suited for outdoor dew point measurement and reliably determines dew points even under harsh industrial conditions.

 

Application examples

  • Dew point measurement in compressed air systems after adsorption dryers, membran dryers or refrigeration dryer
  • Residual moisture measurement and dew point measurement in gases such as: oxygen, nitrogen, argon, hydrogen, natural gas, biogas...

Special features of the dew point sensor FA 550:

  • Robust, waterproof die-cast aluminum housing, IP 67
  • Alarm relay - limit value adjustable via buttons (max 60VDC, 0.5 A)
  • 4 ... 20 mA analog output
  • Optional: 2 pieces 4 ... 20 mA analog output e.g. for dew point and temperature
  • Extremely long-term stable
  • Fast adjustment time
  • Pressure resistant up to 500 bar (optional)
  • NEW: Modbus RTU interface
  • NEW: Ethernet interface (optional)
  • NEW: Higher resolution of the sensor signal due to improved evaluation electronics
  • NEW: Sensor diagnosis on-site with handheld device or CS Service Software
  • Readable via Modbus: pressure dew point [° Ctd.], temperature [° C], rel. humidity [% RH], abs. humidity [g / m3], degree of humidity [g / m3], moisture content V / V [ppmV / V], Partial vapor pressure [hPa], atmospheric dew point [° Ctd.atm]

List Code

 

   
       
Description Device
CHART RECORDER      
Intelligent chart recorder for compressed air and gases Measurement - control - indication - alarm - recording - evaluation DS 500 + Accessories
Intelligent mobile chart recorder
Energy analysis - consumption measurement - leakage calculation at compressed air systems
DS 500 mobile
+ Accessories
Affordable mobile chart recorder, Energy analysis - flow measurement - leckage calculation at compressed air systems DS 400 mobile
Mobile current/effective power meter suitable for DS 500/ DS 400 mobile CS PM 600
CS ENERIUM 30 Current/effective power meter
 for panel mounting
CS ENERIUM 30
Hand-held instrument e.g. for flow measurement PI 500
HUMIDITY/DEW POINT MEASUREMENT      
Portable dew point meter for relative humidity,
temperature, dew point measurement
DP 500 / DP 510
Portable dew point meter with integrated pressure sensor DP 400 mobile
Dew point sensor for membrane and desiccant driers FA 510/515
DS 52-Set
Dew point sensor for refrigeration driers  FA 510/515
DS 52-Set
Dew point set for compressed air and gases DS 400
Dew point measurement for refrigeration,
membrane and desiccant dryers 
FA 500
Dew point measurement in explosive areas FA 515 Ex
Accessories mains units  
Accessories for dew point measurement and calibration  
FLOW/CONSUMPTION MEASUREMENT      
Precise flow measurement for compressed air and gases
for heavy duty industrial applications
VA 550/570 (ATEX)
Flow sensors for compressed air and gases VA 500/520
Flow station for compressed air and gases DS 400
Flow direction switch for compressed air systems VA 409
Useful accessories: Measuring sections, Drilling jig  
Useful accessories: Spot drilling collars, thickness meter  
Calibration of flow sensors  
       
       
 
Description Device
Compressed air quality according to ISO 8573  
Compressed air quality measurement
according to ISO 8573
OIL-Check/PC 400 
LEAKAGE MEASUREMENT  
Leak detector with camera LD 500 / 510
Leak detector for compressed air systems LD 400
PRESSURE MEASUREMENT  
Differential Pressure Sensor 1.6 bar diff Differential pressure
sensor
DIGITAL DISPLAYS  
Digital displays for wall or panel mounting DS51 / DS52
 Calibration  
Calibration services for dew point, relative humidity  
Calibration services for flow sensors  
Re-calibration and service  
Products not included in the catalogue:  
FA 540 dew point sensor with same pinning at M12 plugas FA 410 FA 540 
FA 545 dew point sensor with same pinning at M12 plugas FA 415 FA 545
Terms & Conditions  
Price list 2019      
DS 500 - Intelligent chart recorder  
  Order no.
DS 500 - intelligent chart recorder in basic version (4 sensor inputs) 0500 5000
Option 4 additional sensor inputs for DS 500 Z500 5001
Option 8 additional sensor inputs for DS 500 Z500 5002
Option Integrated webserver Z500 5003
Option "consumption report" statistics, daily/weekly/monthly report Z500 5004
Option version for panel mounting Z500 5006
Option power supply 24VDC (instead of 100...240 VAC) Z500 5007
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels,
(mathematical functions: addition, subtraction, division, multiplication)
Z500 5008
Option: "Totalizer function for analogue signals" Z500 5009
External Gateway PROFIBUS for RS 485 interface connection Z500 3008
External Gateway PROFINET for RS 485 interface connection     Z500 3009
Software:  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040
CS Soft Network - Database Client/Server Solution (up to 5 DS 500) -
database (MySQL) to Server - data evaluation via Client-Software
0554 7041
CS Soft Network - Database Client/Server Solution (up to 10 DS 500) -
database (MySQL) to Server - data evaluation via Client-Software
0554 7042
CS Soft Network - Database Client/Server Solution (up to 20 DS 500) -
database (MySQL) to Server - data evaluation via Client-Software
0554 7043
CS Soft Network - Database Client/Server Solution (> 20 DS 500) -
database (MySQL) to Server - data evaluation via Client-Software
0554 7044
Software Support / h 9999 9998 
Flow sensor VA 500  
  Order no.
VA 500 flow sensor, with RS 485 interface (Modbus-RTU), with analogue output 4...20mA and pulse output (galvanically separated) 0695 5001
Max. Version (185 m/s) Z695 5003
HighSpeed version (224 m/s) Z695 5002
Display Z695 5000
M-Bus (pulse output not available) Z695 5004
Sensor length 120 mm ZSL 0120
Sensor length 160 mm ZSL 0160
Sensor length 220 mm ZSL 0220
Sensor length 300 mm ZSL 0300
Sensor length 400 mm ZSL 0400
Sensor length 500 mm ZSL 0500
Sensor length 600 mm ZSL 0600
Sensor length 700 mm ZSL 0700
Ball valve I/I G 1/2" stainless steel 3300 0002
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007
M12 – T plug for VA 500/520 to connect several sensors 020000823
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010
Oil and fat free, special cleaning   0699 4005
5 point precision calibration of new instrument with ISO certificate 3200 0001
Real gas calibration 3200 0015
Real gas calibration for mixed gases on request
Flow sensor VA 520 with integrated measuring section  
  Order no.
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525
Option signal output / bus connection  
M-Bus (pulse output not available) Z695 5004
Connection cables:  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease 3200 0010
Option: special cleaning 0699 4005
5 point precision calibration with ISO certificate  3200 0001
Real gas calibration 3200 0015
Real gas calibration for mixed gases on request
Further accessories:  
Closing cap for measuring section in aluminium 0190 0001
Closing cap for measuring section stainless steel 1.4404 0190 0002
M12 – T plug for VA 500/520 to connect several sensors 020000823
Flow measurment VA 500/ VA 520 for below gases  
  Order no.
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request
Dew point sensors FA 510      
  Order no.
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0510
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0512
Measuring chamber with inner threat G1/2" and mounted male coupling DN 7,2
for quick-lock coupling
0699 3390
More measuring chambers please see on catalogue page 60  
Connection cables for VA/FA sensors      
  Order no.
Connection cable for VA/FA, 5 m with M12 plug 0553 0104
Connection cable for VA/FA, 10 m with M12 plug 0553 0105
Connection cable for VA/FA, 20 m with M12 plug 0553 0120
Pressure sensors      
  Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556
Standard pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560
Precision pressure sensor CS (0..0.6 bar) accuracy ± 0.5 % 0694 3549
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request
Temperature sensors      
  Order no.
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201
Outdoor temperature probe, PT 100 class B (2-wire) in wall housing
(82x55x33 mm), temperature range: -50°C to +80°C
0604 0203
Indoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm),
temperature range: -50°C to +80°C
0604 0204
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201
Connection cables for pressure/temperature sensors  
  Order no.
Connection cable for sensors 5 m, with open ends 0553 0108
Connection cable for sensors 10 m, with open ends 0553 0109
Clamp-on meters      
  Order no.
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends 0554 0510
Clamp-on ammeter 0…1000 A RMS, 4…20 mA = 0…1000 A, 10-30 VDC, 3 m connection cable with open ends 0554 0518
Calibration certificate for clamp-on ammeters, 5 calibration points  0554 3333
CS ENERIUM 30 Current/effective power meter for panel mounting  
  Order no.
CS ENERIUM 30 Current/effective power meter for panel mounting,
with RS 485 Interface
0554 5355
Current transformer 100/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5344 
Current transformer 200/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5345
Current transformer 300/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5346
Current transformer 500/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5347
Current transformer 600/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5348
Current transformer 1000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)
0554 5349 
Current transformer 2000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)
0554 5350
Connection cable CS ENERIUM 30: Order no.
Connection cable for sensors 5 m, with open ends 0553 0108
Connection cable for sensors 10 m, with open ends 0553 0109
Connection cable variable length, open ends on both sides 0553 0126
DS 500 mobile - intelligent chart recorder
  Order no.
Intelligent chart recorder DS 500 mobile, 4 sensor inputs 0500 5012
Intelligent chart recorder DS 500 mobile, 8 sensor inputs 0500 5013
Intelligent chart recorder DS 500 mobile, 12 sensor inputs 0500 5014
Option “integrated Webserver” Z500 5003
Option “consumption report” statistics, daily/weekly/monthly report Z500 5004
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels,
(mathematical functions: addition, subtraction, division, multiplication)
Z500 5008
Option: "Totalizer function for analogue signals" Z500 5009
Software:  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040
CS Soft Energy Analyzer for energy and leakage analysis of compressed air stations 0554 7050
Software Upgrade of the already existing CS Soft Basic to CS Soft Energy Analyzer 0554 7045
GSM module for data transfer via the GSM network (mobile network) on request
Connection cables:  
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 5 m 0553 0501 
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 10 m 0553 0502
Connection cable for VA/FA 5xx series on mobile instruments,ODU / M 12, 5 m 0553 1503
Connection cable for VA/FA 400 series on mobile instruments,ODU / M 12, 5 m 0553 0503
Extension cable for mobile instruments,ODU / ODU, 10 m 0553 0504
Connection cable for mobile current/effective power meter to DS 500 mobile, 5 m 0553 0506
Adapter for connection cable ODU 5 to 8 pole for existing cable part no. 0553.0111
(for VA/FA sensors) from DS 300 mobile to DS 500 mobile
0553 0507
Adapter for connection cable ODU 5 to 8 pole for existing cable part no. 0553.0110
(for analogue) from DS 300 mobile to DS 500 mobile
0553 0508
Mounted Odu plug for connection on mobile instruments Z604 0104
Case for all sensors (dimensions: 500 x 360 x 180 mm) 0554 6006
Flow sensors VA 500      
  Order no.
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl.
5 m cable to mobile instruments
0695 1124
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm
incl. 5 m cable to mobile instruments
0695 1125
Sensor length 120 mm ZSL 0120
Sensor length  160 mm ZSL 0160
Sensor length  220 mm ZSL 0220
Sensor length  300 mm ZSL 0300
Sensor length  400 mm ZSL 0400
Sensor length  500 mm ZSL 0500
Sensor length  600 mm ZSL 0600
Sensor length  700 mm ZSL 0700
Ball valve I/I G 1/2" stainless steel 3300 0002
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007
M12 – T plug for VA 500/520 to connect several sensors 020000823
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010
Oil and fat free, special cleaning   0699 4005
5 point precision calibration with ISO certificate  3200 0001
Real gas calibration   3200 0015
Real gas calibration for mixed gases on request
Flow sensor VA 520 with integrated measuring section  
  Order no.
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525
Flow measurment VA 500/ VA 520 for below gases  
  Order no.
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request
Dew point sensors FA 510  
  Order no.
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1510
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1512
Connection cables for VA/FA sensors  
  Order no.
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m 0553 1503
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504
Calibration certificates for flow sensors / dew point sensors  
  Order no.
5 point precision calibration for consumption sensors including ISO certificate 3200 0001
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396
Pressure sensors      
  Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558
Standard pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560
Precision pressure sensor CS (0..0.6 bar) accuracy ± 0.5 % 0694 3549
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request
Temperature sensors      
  Order no.
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm,
d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments
0604 0200
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments 0604 0202
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201
Connection cables for pressure/temperature sensors  
  Order no.
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501 
Connection cable for pressure, temperature, or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504
Mounted Odu plug for connection on mobile instruments Z604 0104
Clamp-on meters      
  Order no.
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin 0554 0511
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC,
3 m connection cable with ODU-plug (8 poles) for mobile devices
0554 0519
Calibration certificate for clamp-on ammeters, 5 calibration points 0554 3333
Current/effective power meter up to 32 A  
  Order no.
CS PM 532  
Current/effective power meter up to 32 A in a carrying case 0554 5340
CS PM 600 Current/effective power meter  
  Order no.
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m 0554 5341
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m 0554 5342
Current transformer 100A/1A consisting of 3 transformers for mobile devices Z554 0001
Current transformer 600A/1A consisting of 3 transformers for mobile devices Z554 0002
Current transformer 1000A/1A consisting of 3 transformers for mobile devices Z554 0003
CS ENERIUM 30 Current/effective power meter for panel mounting  
  Order no.
CS ENERIUM 30 Current/effective power meter for panel mounting,
with RS 485 Interface
0554 5355
Current transformer 100/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5344 
Current transformer 200/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5345
Current transformer 300/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5346
Current transformer 500/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5347
Current transformer 600/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5348
Current transformer 1000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)
0554 5349 
Current transformer 2000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)
0554 5350
   
Connection cable CS ENERIUM 30:  
Connection cable for sensors 5 m, with open ends 0553 0501 
Connection cable for sensors 10 m, with open ends 0553 0502
Mobile chart recorder DS 400 mobile  
  Order no.
Product Sensor input 1+2 Sensor input 3+4  
DS 400 mobile - mobile chart recorder with graphic display and touch screen Digital  ---------- 0500 4012 D
Digital Digital 0500 4012 DD
Digital Analogue 0500 4012 DA
Analogue  ---------- 0500 4012 A
Analogue Analogue 0500 4012 AA
Options:  
Integrated Ethernet- and RS 485 interface Z500 4004
Integrated webserver Z500 4005
"Mathematics calculation function" for 4 freely selectable channels,
(virtual channels): addition, subtraction, division, multiplication
Z500 4007
"Totalizer function for analogue signals" Z500 4006
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...)     Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003
Further Accessories:  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040
CS Soft Energy Analyzer for energy and leakage analysis of compressed air stations 0554 7050
Software Upgrade of the already existing CS Soft Basic to CS Soft Energy Analyzer 0554 7045
Connection cable for VA/FA 5xx series on mobile instruments,ODU / M 12, 5 m 0553 1503
Connection cable for VA/FA 400 series on mobile instruments,ODU / M 12, 5 m 0553 0503
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 5 m 0553 0501
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 10 m 0553 0502
Extension cable for mobile instruments,ODU / ODU, 10 m 0553 0504
Connection cable for mobile current/effective power meter to DS 500 mobile, 5 m 0553 0506
Case for all sensors (Dimensions: 500 x 360 x 120 mm) 0554 6006
Flow sensor VA 500      
  Order no.
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl.
5 m cable to mobile instruments
0695 1124
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm
incl. 5 m cable to mobile instruments
0695 1125
Sensor length 120 mm ZSL 0120
Sensor length  160 mm ZSL 0160
Sensor length  220 mm ZSL 0220
Sensor length  300 mm ZSL 0300
Sensor length  400 mm ZSL 0400
Sensor length  500 mm ZSL 0500
Sensor length  600 mm ZSL 0600
Sensor length  700 mm ZSL 0700
Ball valve I/I G 1/2" stainless steel 3300 0002
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007
M12 – T plug for VA 500/520 to connect several sensors 020000823
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010
Oil and fat free, special cleaning   0699 4005
5 point precision calibration with ISO certificate  3200 0001
Real gas calibration   3200 0015
Real gas calibration for mixed gases on request
Flow sensor VA 520 with integrated measuring section  
  Order no.
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525
Flow measurment VA 500/ VA 520 for below gases  
  Order no.
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request
Dew point sensors FA 510      
  Order no.
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1510
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1512
Connection cables for VA/FA sensors      
  Order no.
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m 0553 1503
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504
Calibration certificates for flow sensors / dew point sensors  
  Order no.
5 point precision calibration for consumption sensors including ISO certificate 3200 0001
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396
Pressure sensors      
  Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558
Standard pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % 0694 3549
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request
Temperature sensors      
  Order no.
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm,
d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments
0604 0200
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments 0604 0202
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201
Connection cables for pressure/temperature sensors  
  Order no.
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501 
Connection cable for pressure, temperature, or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504
Mounted Odu plug for connection on mobile instruments Z604 0104
Clamp-on meters      
  Order no.
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin 0554 0511
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC,
3 m connection cable with ODU-plug (8 poles) for mobile devices
0554 0519
Calibration certificate for clamp-on ammeters, 5 calibration points 0554 3333
Current/effective power meter up to 32 A  
  Order no.
CS PM 532  
Current/effective power meter up to 32 A in a carrying case 0554 5340
CS PM 600 Current/effective power meter  
  Order no.
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m 0554 5341
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m 0554 5342
Current transformer 100A/1A consisting of 3 transformers for mobile devices Z554 0001
Current transformer 600A/1A consisting of 3 transformers for mobile devices Z554 0002
Current transformer 1000A/1A consisting of 3 transformers for mobile devices Z554 0003
CS ENERIUM 30Current/effective power meter for panel mounting  
  Order no.
CS ENERIUM 30 Current/effective power meter for panel mounting,
with RS 485 Interface
0554 5355
Current transformer 100/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5344 
Current transformer 200/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5345
Current transformer 300/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5346
Current transformer 500/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5347
Current transformer 600/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5348
Current transformer 1000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)
0554 5349 
Current transformer 2000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)
0554 5350
   
Connection cable CS ENERIUM 30:  
Connection cable for sensors 5 m, with open ends 0553 0501 
Connection cable for sensors 10 m, with open ends 0553 0502
Portable Hand-held instrument PI 500      
  Order no.
PI 500 portable measuring instrument with integrated data logger, incl. power supply 0560 0511
Option for PI 500: “mathematics calculat. function” for 4 freely selectable "virtual" channels Z500 5107
Option for PI 500: "Totalizer function for analogue signals" Z500 5106
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040
Transportation case 0554 6510
Flow sensor VA 500      
  Order no.
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl.
5 m cable to mobile instruments
0695 1124
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm
incl. 5 m cable to mobile instruments
0695 1125
Sensor length 120 mm ZSL 0120
Sensor length  160 mm ZSL 0160
Sensor length  220 mm ZSL 0220
Sensor length  300 mm ZSL 0300
Sensor length  400 mm ZSL 0400
Sensor length  500 mm ZSL 0500
Sensor length  600 mm ZSL 0600
Sensor length  700 mm ZSL 0700
Ball valve I/I G 1/2" stainless steel 3300 0002
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007
M12 – T plug for VA 500/520 to connect several sensors 020000823
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010
Oil and fat free, special cleaning   0699 4005
5 point precision calibration with ISO certificate  3200 0001
Real gas calibration   3200 0015
Real gas calibration for mixed gases on request
Flow sensor VA 520 with integrated measuring section  
  Order no.
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525
Flow measurment VA 500/ VA 520 for below gases  
  Order no.
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request
Dew point sensors FA 510      
  Order no.
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1510
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1512
Connection cables for VA/FA sensors      
  Order no.
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m 0553 1503
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504
Calibration certificates for flow sensors / dew point sensors  
  Order no.
5 point precision calibration for consumption sensors including ISO certificate 3200 0001
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396
Pressure sensors      
  Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % 0694 3549
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request
Temperature sensors      
  Order no.
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm,
d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments
0604 0200
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments 0604 0202
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201
Connection cables for pressure/temperature sensors  
  Order no.
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501 
Connection cable for pressure, temperature, or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504
Mounted Odu plug for connection on mobile instruments Z604 0104
Clamp-on meters      
  Order no.
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin 0554 0511
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC,
3 m connection cable with ODU-plug (8 poles) for mobile devices
0554 0519
Calibration certificate for clamp-on ammeters, 5 calibration points 0554 3333
Current/effective power meter up to 32 A      
  Order no.
CS PM 532  
Current/effective power meter up to 32 A in a carrying case 0554 5340
CS PM 600 Current/effective power meter  
  Order no.
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m 0554 5341
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m 0554 5342
Current transformer 100A/1A consisting of 3 transformers for mobile devices Z554 0001
Current transformer 600A/1A consisting of 3 transformers for mobile devices Z554 0002
Current transformer 1000A/1A consisting of 3 transformers for mobile devices Z554 0003
Portable dew point meter DP 500      
  Order no.
Set DP 500 in a case - consisting of: 0600 0500
Portable dew point meter DP 500 for compressed air and gases 0560 0500
Mobile measuring chamber up to 16 bar 0699 4490
Diffusion-tight teflon hose 1 m with fast coupling at both ends 0554 0003
Power supply for DP 500/510 0554 0009
Control and calibration set 11.3% RH 0554 0002
Quick-lock coupling 0530 1101
Dry container for CS dew point sensors 0699 2500
Transportation case (small) for DP 500 0554 6500
   
Further options, not included in the set  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040
Portable dew point meter DP 500 (high pressure version up to 350 bar) 0560 0501
High-pressure measuring chamber up to 350 bar 0699 3590
Measuring chamber for atmospheric dew point 0699 3690
Measuring chamber for granulate dryers for minimum over pressure 0699 3490
Control and calibration set 33 % RH 0554 0004
Control and calibration set 75.3 % RH 0554 0005
Additional calibration point freely selectable in the range between -80…+20°Ctd 0700 7710
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396
Portable dew point meter DP 510 with external sensor input  
  Order no.
Set DP 510 in a case - consisting of: 0600 0510
Portable dew point meter DP 510 with one additional sensor input 0560 0510
Mobile measuring chamber up to 16 bar 0699 4490
Diffusion-tight teflon hose 1 m with fast coupling at both ends 0554 0003
Power supply for DP 500/510 0554 0009
Control and calibration set 11.3% RH 0554 0002
Quick-lock coupling 0530 1101
Dry container for CS dew point sensors 0699 2500
Transportation case (big) for DP 510 as well as further sensors 0554 6510
   
Further options, not included in the set  
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet 0554 7040
Option for DP 510: “mathematics calculat. function” for 4 freely selectable “virtual” channels Z500 5107
Option for DP 510: "Totalizer function for analogue signals" Z500 5106
Portable dew point meter DP 510 for compressed air and gases
(high pressure version up to 350 bar)
0560 0512
High-pressure measuring chamber up to 350 bar 0699 3590
Measuring chamber for atmospheric dew point 0699 3690
Measuring chamber for granulate dryers for minimum over pressure 0699 3490
Control and calibration set 33 % RH 0554 0004
Control and calibration set 75.3 % RH 0554 0005
Additional calibration point freely selectable in the range between -80…+20°Ctd 0700 7710
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396
Mounted Odu plug for connection on mobile instruments Z604 0104
Flow sensor VA 500      
  Order no.
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl.
5 m cable to mobile instruments
0695 1124
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm
incl. 5 m cable to mobile instruments
0695 1125
Sensor length 120 mm ZSL 0120
Sensor length  160 mm ZSL 0160
Sensor length  220 mm ZSL 0220
Sensor length  300 mm ZSL 0300
Sensor length  400 mm ZSL 0400
Sensor length  500 mm ZSL 0500
Sensor length  600 mm ZSL 0600
Sensor length  700 mm ZSL 0700
Ball valve I/I G 1/2" stainless steel 3300 0002
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007
M12 – T plug for VA 500/520 to connect several sensors 020000823
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010
Oil and fat free, special cleaning   0699 4005
5 point precision calibration with ISO certificate  3200 0001
Real gas calibration   3200 0015
Real gas calibration for mixed gases on request
Flow sensor VA 520 with integrated measuring section  
  Order no.
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525
Flow measurment VA 500/ VA 520 for below gases  
  Order no.
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request
Dew point sensors FA 510  
  Order no.
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1510
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1512
Connection cables for VA/FA sensors  
  Order no.
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m 0553 1503
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504
Calibration certificates for flow sensors / dew point sensors  
  Order no.
5 point precision calibration for consumption sensors including ISO certificate 3200 0001
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396
Pressure sensors      
  Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % 0694 3549
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request
Temperature sensors  
  Order no.
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm,
d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments
0604 0200
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments 0604 0202
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201
Connection cables for pressure/temperature sensors  
  Order no.
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501 
Connection cable for pressure, temperature, or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504
Mounted Odu plug for connection on mobile instruments Z604 0104
Clamp-on meters      
  Order no.
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin 0554 0511
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC,
3 m connection cable with ODU-plug (8 poles) for mobile devices
0554 0519
Calibration certificate for clamp-on ammeters, 5 calibration points 0554 3333
Current/effective power meter up to 32 A  
  Order no.
CS PM 532  
Current/effective power meter up to 32 A in a carrying case 0554 5340
CS PM 600 Current/effective power meter  
  Order no.
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m 0554 5341
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m 0554 5342
Current transformer 100A/1A consisting of 3 transformers for mobile devices Z554 0001
Current transformer 600A/1A consisting of 3 transformers for mobile devices Z554 0002
Current transformer 1000A/1A consisting of 3 transformers for mobile devices Z554 0003
DP 400 mobile with integrated dew point and pressure measurement  
  Order no.
DP 400 mobile - Portable dew point meter with integrated pressure measurement,
incl. transportation bag for teflon hose and power supply
0500 4505
Options:  
Option: Integrated data logger for 100 million measured values Z500 4002
Option: Integrated Ethernet- and RS 485 interface Z500 4004
Option: Integrated webserver Z500 4005
Option: “mathematics calculat. function” for 4 freely selectable “virtual” channels Z500 4007
Option: 2 additional sensor inputs for external sensors
(1 x digital sensor Modbus, 1 x analogue sensor)
Z500 4001
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040
Connection cables:  
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m 0553 1503
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504
Dew point sensors FA 510/515 for desiccant driers  
  Order no.
FA 510 dew point sensor for desiccant driers  incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0510
FA 515 dew point sensor for desiccat driers incl. inspection certificate, 4…20 mA output signal (2-wire connection) or Modbus-RTU interface 0699 0515
   
Additional costs FA 510, FA 515 dew point sensors:  
Measuring ranges:  
 -80…+20°Ctd (-112 to 68°F)  
 -80...+20°Ctd (output scaling 4...20 mA = -100…+20°Ctd)  
 -80…+20°Ctd (output scaling 4…20 mA = -110…+20°Ctd)  
Analogue output:  
4…20 mA (3-Draht)  
Special version 2…10 Volt Z699 0510
Scaling:  
Standard  
Special scaling: 4…20 mA=__ … __ g/m³, ppm etc. Z699 0514
Connector plug:  
M12 plug  
M12 plug (90°) angled  
Max. pressure:  
50 bar  
350 bar  Z699 0515
Surface condition:  
Normal  
Free of oil & grease Z699 0517
   
Connection cables:  
Connection cable for VA/FA, 5 m with M12 plug 0553 0104
Connection cable for VA/FA, 10 m with M12 plug 0553 0105
Connection cable for VA/FA, 20 m with M12 plug 0553 0120
Connection cable for VA/FA sensors, 5 m with 90° offset  M12 plug 0553 0118
Connection cable for VA/FA sensors, 10 m with 90° offset  M12 plug 0553 0119
Connection cable for VA/FA, 5 m shielded 0553 0129
Connection cable for VA/FA, 10 m shielded 0553 0130
   
Measuring chambers:  
Standard measuring chamber up to 16 bar 0699 3390
Measuring chamber for atmospheric dew point 0699 3690
High pressure measuring chamber up to 350 bar 0699 3590
Measuring Chamber for granulate dryers up to 250 mbar 0699 3490
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290
Quick-lock coupling  NW 7,2 sealing tape 0530 1101
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007
   
Mains units:  
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110
Transformer 100-240  V AC/24 V DC , 0,35 A on top-hat rail 0699 3340
   
Calibration and adjustment:  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable 0700 7710
Replacement unit for the period of re-calibration 0699 3900
Dew point meter in exchange with calibration certificate at -40° Ctd 0699 3990
Control and calibration set 11.3% RH 0554 0002
Control and calibration set 33 % RH 0554 0004
Control and calibration set 75,3 % RH 0554 0005
Dew point set DS 52 for desiccant driers  
  Order no.
Dew point set DS 52 for desiccant driers  0600 5100
consisting of:  
DS 52 LED display in wall housing 0500 0009
FA 510 dew point sensor for desiccant driers  incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0510
Standard measuring chamber up to 16 bar 0699 3390
Connection cable for VA/FA, 5 m with M12 plug 0553 0104
   
Options:  
Power supply 24 VDC (instead of 230 VAC) Z500 0001
Power supply 110 VAC (instead of 230 VAC) Z500 0002
Alarm unit mounted at wall housing Z500 0003
Alarm unit for external mounting with 5 m cable Z500 0004
Connecting cable version Switzerland - three-pole Z553.CH
Connecting cable version USA - three-pole Z553.USA
   
Calibration and adjustment:  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable 0700 7710
Control and calibration set 11.3% RH 0554 0002
Control and calibration set 33 % RH 0554 0004
Control and calibration set 75,3 % RH 0554 0005
Dew point sensors FA 510/515 for refrigeration driers  
  Order no.
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0512
FA 515 dew point sensor for refrigeration driers incl. inspection certificate, 4…20 mA output signal (2-wire connection) or Modbus-RTU interface 0699 0517
   
Additional costs FA 510, FA 515 dew point sensors:  
Measuring ranges:  
 -20…+50°Ctd (-4 to 122 °F)  
 -40…+30°Ctd (-40 to 86°F) on request
 -45…+70°Ctd (-49 to 158 °F) on request
 -60…+30°Ctd (-76 to 86°F) on request
Analogue output:  
4…20 mA (3-Draht)  
Special version 2…10 Volt Z699 0510
Scaling:  
Standard  
Special scaling: 4…20 mA=__ … __ g/m³, ppm etc. Z699 0514
Connector plug:  
M12 plug  
M12 plug (90°) angled  
Max. pressure:  
50 bar  
350 bar  Z699 0515
Surface condition:  
Normal  
Free of oil & grease Z699 0517
   
Connection cables:  
Connection cable for VA/FA, 5 m with M12 plug 0553 0104
Connection cable for VA/FA, 10 m with M12 plug 0553 0105
Connection cable for VA/FA, 20 m with M12 plug 0553 0120
Connection cable for VA/FA sensors, 5 m with 90° offset  M12 plug 0553 0118
Connection cable for VA/FA sensors, 10 m with 90° offset  M12 plug 0553 0119
Connection cable for VA/FA, 5 m shielded 0553 0129
Connection cable for VA/FA, 10 m shielded 0553 0130
   
Measuring chambers:  
Standard measuring chamber up to 16 bar 0699 3390
Measuring chamber for atmospheric dew point 0699 3690
High pressure measuring chamber up to 350 bar 0699 3590
Measuring Chamber for granulate dryers up to 250 mbar 0699 3490
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290
Quick-lock coupling  NW 7,2 sealing tape 0530 1101
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007
   
Mains units:  
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110
Transformer 100-240  V AC/24 V DC , 0,35 A on top-hat rail 0699 3340
   
Calibration and adjustment:  
Precision calibration at 3°Ctd including ISO certificate 0699 3396
Precision calibration in the range of -20 to 50°Ctd, one additional point, freely selectable 0700 7710
Replacement unit for the period of re-calibration 0699 3900
Dew point meter in exchange with calibration certificate at -40° Ctd 0699 3990
Control and calibration set 11.3% RH 0554 0002
Control and calibration set 33 % RH 0554 0004
Control and calibration set 75,3 % RH 0554 0005
Dew point set DS 52 for refrigeration driers  
  Order no.
Dew point set DS 52 for refrigeration driers 0600 5120
consisting of:  
DS 52 LED display in wall housing 0500 0009
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0512
Standard measuring chamber up to 16 bar 0699 3390
Connection cable for VA/FA, 5 m with M12 plug 0553 0104
   
Options:  
Power supply 24 VDC (instead of 230 VAC) Z500 0001
Power supply 110 VAC (instead of 230 VAC) Z500 0002
Alarm unit mounted at wall housing Z500 0003
Alarm unit for external mounting with 5 m cable Z500 0004
Connecting cable version Switzerland - three-pole Z553.CH
Connecting cable version USA - three-pole Z553.USA
   
Calibration and adjustment:  
Precision calibration at 3°Ctd including ISO certificate 0699 3396
Precision calibration in the range of -20 to 50°Ctd, one additional point, freely selectable 0700 7710
Control and calibration set 11.3% RH 0554 0002
Control and calibration set 33 % RH 0554 0004
Control and calibration set 75,3 % RH 0554 0005
Dew point set DS 400  
  Order no.
Dew point set DS 400 for desiccant driers (-80…+20°Ctd) 0601 0510
consisting of:  
Chart recorder DS 400 0500 4000
FA 510 dew point sensor for desiccant driers  incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface (-80…+20°Ctd) 0699 0510
Standard measuring chamber up to 16 bar 0699 3390
Connection cable for VA/FA, 5 m with M12 plug 0553 0104
   
Dew point set DS 400 for refrigeration driers (-20…+50°Ctd) 0601 0512
consisting of:  
Chart recorder DS 400 0500 4000
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface (-20…+50°Ctd) 0699 0512
Standard measuring chamber up to 16 bar 0699 3390
Connection cable for VA/FA, 5 m with M12 plug 0553 0104
   
Optionen:  
Integrated data logger for 100 million measured values Z500 4002
Integrierte Ethernet- und RS 485 Schnittstelle Z500 4004
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...) Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003
Integrated Webserver Z500 4005
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040
Alarm device assembled Z500 0003
Alarm device for external assembly incl. 5 m cable Z500 0004
Calibration and adjustment:  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396
DS 400 - Chart recorder      
  Order no.
Product sensor-
input 1+2
sensor-
input 3+4
 
Chart recorder DS400 - with 3.5“ graphic display  - easy operation with touch screen digital  ---------- 0500 4000 D
digital digital 0500 4000 DD
digital analogue 0500 4000 DA
analogue  ---------- 0500 4000 A
analogue analogue 0500 4000 AA
Options:  
Integrated data logger for 100 Mio. measured values Z500 4002
Integrated Ethernet- and RS 485 interface Z500 4004
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...) Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003
External Gateway PROFIBUS for RS 485 interface connection Z500 3008
External Gateway PROFINET for RS 485 interface connection Z500 3009
Option Integrated Webserver DS400 Z500 4005
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels Z500 4007
Option "Totalizer function for analogue signals" Z500 4006
   
Further options:  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040
CS Soft Network - Database Client/Server Solution (up to 5 DS 400) - database (MySQL) to Server - data evaluation via Client-Software 0554 7041
CS Soft Network - Database Client/Server Solution (up to 10 DS 400) - data base (MySQL) to server - data evaluation via Client-Software 0554 7042
CS Soft Network - Database Client/Server Solution (up to 20 DS 400) - data base (MySQL) to server - data evaluation via Client-Software 0554 7043
CS Soft Network - Database Client/Server Solution (> 20 DS 400) - data base (MySQL) to server - data evaluation via Client-Software 0554 7044
Software Support / h 9999 9998
   
Ready for plug in and parametrization 0990 0010
Everything ready for plug in 0990 0011
Flow sensor VA 500      
  Order no.
VA 500 flow sensor, with RS 485 interface (Modbus-RTU), with analogue output 4...20mA and pulse output (galvanically separated) 0695 5001
Max. Version (185 m/s) Z695 5003
HighSpeed version (224 m/s) Z695 5002
Display Z695 5000
M-Bus (pulse output not available) Z695 5004
Sensor length 120 mm ZSL 0120
Sensor length 160 mm ZSL 0160
Sensor length 220 mm ZSL 0220
Sensor length 300 mm ZSL 0300
Sensor length 400 mm ZSL 0400
Sensor length 500 mm ZSL 0500
Sensor length 600 mm ZSL 0600
Sensor length 700 mm ZSL 0700
Ball valve I/I G 1/2" stainless steel 3300 0002
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007
M12 – T plug for VA 500/520 to connect several sensors 020000823
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010
Oil and fat free, special cleaning   0699 4005
5 point precision calibration of new instrument with ISO certificate 3200 0001
Real gas calibration 3200 0015
Real gas calibration for mixed gases on request
Flow sensor VA 520 with integrated measuring section  
  Order no.
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525
   
Option signal output / bus connection  
M-Bus (pulse output not available) Z695 5004
   
Connection cables:  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120
   
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease 3200 0010
Option: special cleaning 0699 4005
5 point precision calibration with ISO certificate  3200 0001
Real gas calibration 3200 0015
Real gas calibration for mixed gases on request
   
Further accessories:  
Closing cap for measuring section in aluminium 0190 0001
Closing cap for measuring section stainless steel 1.4404 0190 0002
M12 – T plug for VA 500/520 to connect several sensors 020000823
Flow measurment VA 500/ VA 520 for below gases  
  Order no.
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request
Dew point sensors FA 510      
  Order no.
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0510
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0512
Measuring chamber with inner threat G1/2" and mounted male coupling DN 7,2
for quick-lock coupling
0699 3390
More measuring chambers please see on catalogue page 60  
Connection cables for VA/FA sensors      
  Order no.
Connection cable for VA/FA, 5 m with M12 plug 0553 0104
Connection cable for VA/FA, 10 m with M12 plug 0553 0105
Connection cable for VA/FA, 20 m with M12 plug 0553 0120
Pressure sensors      
  Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356
Precision pressure sensor CS 40, accuracy ± 0.5 % 0694 3930
Precision pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % 0694 3549
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request
Temperature sensors      
  Order no.
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201
Outdoor temperature probe, PT 100 class B (2-wire) in wall housing
(82x55x33 mm), temperature range: -50°C to +80°C
0604 0203
Indoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm),
temperature range: -50°C to +80°C
0604 0204
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201
Connection cables for pressure/temperature sensors  
  Order no.
Connection cable for sensors 5 m, with open ends 0553 0108
Connection cable for sensors 10 m, with open ends 0553 0109
Clamp-on meters      
  Order no.
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends 0554 0510
Clamp-on ammeter 0…1000 A RMS, 4…20 mA = 0…1000 A, 10-30 VDC, 3 m connection cable with open ends 0554 0518
Calibration certificate for clamp-on ammeters, 5 calibration points  0554 3333
CS ENERIUM 30 Current/effective power meter for panel mounting
  Order no.
CS ENERIUM 30 Current/effective power meter for panel mounting,
with RS 485 Interface
0554 5355
Current transformer 100/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5344 
Current transformer 200/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5345
Current transformer 300/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5346
Current transformer 500/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5347
Current transformer 600/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5348
Current transformer 1000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)
0554 5349 
Current transformer 2000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)
0554 5350
   
Connection cable CS ENERIUM 30:  
Connection cable for sensors 5 m, with open ends 0553 0108
Connection cable for sensors 10 m, with open ends 0553 0109
Connection cable variable length, open ends on both sides 0553 0126
FA 500 dew point monitoring      
  Order no.
FA 500 dew point sensor for refrigeration driers, -20...50°Ctd 0699 0501
FA 500 dew point sensor for desiccant driers, -80...20°Ctd 0699 0502
FA 500 dew point sensor,  -60...30°Ctd 0699 0503
   
Options:  
Ethernet-Interface for VA500/VA520, FA500     Z695 5006
Ethernet-Interface PoE for VA500/VA520, FA500 Z695 5007
M-Bus (pulse output not available) Z695 5004
Option analogue output FA5xx, Special version 2…10 Volt Z699 0510
Option max. pressure FA5xx 350 bar Z699 0515
Option max. pressure FA5xx 500 bar Z699 0516
Option special scaling FA5xx 4…20 mA=__ … __ g/m³, ppm etc. Z699 0514
Option connection thread FA5xx, 5/8" UNF Z699 0511
Option connection thread FA5xx, 1/2" NPT Z699 0512
Option surface condition FA5xx, free of oil & grease Z699 0517
   
Connection cables:  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120
Connection cable for VA/FA, 5 m shielded 0553 0129
Connection cable for VA/FA, 10 m shielded 0553 0130
Connection cable for VA/FA sensors, 5 m with 90° offset  M12 plug 0553 0118
Connection cable for VA/FA sensors, 10 m with 90° offset  M12 plug 0553 0119
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 5 m 0553 0106
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 10 m 0553 0107
   
Measuring chambers:  
Standard measuring chamber up to 16 bar 0699 3390
Measuring chamber for atmospheric dew point 0699 3690
High pressure measuring chamber up to 350 bar 0699 3590
Measuring Chamber for granulate dryers up to 250 mbar 0699 3490
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290
Quick-lock coupling  NW 7,2 sealing tape 0530 1101
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007
   
Power supply:  
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110
Transformer 100-240  V AC/24 V DC , 0,35 A on top-hat rail 0699 3340
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 0554 0109
   
Calibration and adjustment:  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable 0700 7710
Control and calibration set 11.3% RH 0554 0002
Control and calibration set 33 % RH 0554 0004
Control and calibration set 75,3 % RH 0554 0005
FA 515 Ex Dew point measurement in explosive areas  
  Order no.
FA 515 Ex pressure dew point meter (-80 to 20°Ctd) 0699 5515
   
Options:  
Special scaling, Analogue output to other humidity parameters:
% RH g/m3, mg/m3, ppm V/V, g/kg
Z699 0514
Intrinsically safe power supply, safety barriers 0554 3071
High pressure measuring chamber up to 350 bar 0699 3590
   
Mains units:  
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110
Mains unit on DIN rail, 100-240 VAC / 24 VDC, 0.35 A 0699 3340
Mains unit 100-240 VAC/24 VDC, 0.35 A for Series VA/FA 400, 2 m cable 0554 0107
Measuring chambers      
  Order no.
Standard measuring chamber up to 16 bar 0699 3390
Measuring chamber for atmospheric dew point 0699 3690
High pressure measuring chamber up to 350 bar 0699 3590
Measuring chamber for granulate dryers for minimum over pressure 0699 3490
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290
Calibration and adjustments of new devices  
  Order no.
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable 0700 7710
Control and calibration set 11.3% RH 0554 0002
Control and calibration set 33 % RH 0554 0004
Control and calibration set 75,3 % RH 0554 0005
Re-calibration (not discountable)      
  Order no.
Precision re-calibration at -40°C dew point with ISO certificate 0699 3333
Precision calibration in the range of -80 to 20° Ctd, one additional point, freely selectable 0700 7710
Replacement unit for the period of re-calibration 0699 3900
Dew point meter in exchange with calibration certificate at -40° Ctd 0699 3990
VA 550 Flow sensor      
  Order no.
VA 550 Flow sensor, measuring head in robust aluminium die cast housing 0695 0550
   
Measuring range: Bestell-Code
A1 - Standard version (92,7 m/s) A1
A2 - Max version (185 m/s) A2
A3 - High-Speed version (224 m/s) A3
   
Screw-in thread:  
B1 - G 1/2" outer thread B1
B2 - NPT 1/2" outer thread B2
B3 - PT 1/2" outer thread B3
   
Mounting length / shaft length:  
C1 - 220 mm C1
C2 - 300 mm C2
C3 - 400 mm C3
C4 - 500 mm C4
C5 - 600 mm C5
C7 - 160 mm C7
   
Option display:  
D1 - with integrated display D1
D2 - without display D2
   
Option signal outputs / bus connection:  
E1 - 2x4...20mA a. output,galv.isolated,pulse output RS485 Modbus-RTU E1
E4 - 1x4…20mA analogue output (not galv. isolated), pulse output, RS 485 (Modbus RTU) E4
E5 - Ethernet-Interface (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) E5
E7 - 2x4..20mA analogue output passive,pulse output RS485 (Mb-RTU) E7
E8 - M-Bus (Z6955504) E8
E9 -  Ethernet-Interface PoE (Power over Ethernet) (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) E9
   
Calibration:  
F1 - no real gas calibration - gas adjustment via gas constant F1
F2 - real gas calibration in the gas type as selected below F2
   
Gas type:  
G1 - Compressed air G1
G2 - Nitrogen (N2) G2
G3 - Argon (Ar) G3
G4 - Carbon dioxide (CO2) G4
G5 - Oxygen (O2) G5
G6 - Nitrous Oxide (N2O) G6
G7 - Natural gas (NG) G7
G8 - Helium (He) - Real gas calibration required  G8
G9 - Propane (C3H8) - Real gas calibration required  G9
G10 - Methane (CH4) G10
G11 - Biogas (Methane 50% : CO2 50%) G11
G12 - Hydrogen (H2) - Real gas calibration required  G12
G90 -Further gas G90
G91 - Gas mixture G91
   
Maximum pressure:  
H3 - 16 bar H3
H1 - 50 bar (not for DVGW approval) H1
H2 - 100 bar (not for DVGW approval) H2
   
Surface condition:  
I1 - Standard version I1
I2 - Special cleaning - oil and grease free (e.g. for oxygen) I2
I3 - LABS free and silicone free, special cleaning oil and grease free I3
   
Accuracy class:  
J1 - ± 1,5% of measured value (standard) J1
J2 - ± 1 % of measured value (precision) J2
   
Maximum gas temperature at the sensor tip:  
K1 - up to 120°C gas temperature (only for ATEX - version) K1
K2 - up to 180°C gas temperature (not for ATEX - version) K2
   
Approvals:  
L1 - Non-explosive area - no approval L1
L2 - ATEX II 2G Ex d IIC T4 L2
L3 - DVGW approval (for natural gas) L3
   
Reference conditions:  
M1 - 20°C, 1000 hPa M1
M2 - 0°C, 1013,25 hPa M2
M3 - 15°C, 981 hPa M3
M4 - 15°C, 1013,25 hPa M4
   
R1 - Special measuring range R1
Further accessories:  
Connection cable for sensors 5 m with open ends 0553 0108
Connection cable for sensors 10 m with open ends 0553 0109
Ethernet connection cable length 5 m, M12 plug x-coded (8 poles) to RJ 45 plug 0553 2503
Ethernet connection cable length 10 m, M12 plug x-coded (8 poles) to RJ 45 plug 0553 2504
5 point precision calibration of new instrument with ISO certificate 3200 0001
Additional calibration point volume flow VA5xx serial, freely selectable 0700 7720
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007
High-pressure protection f. installation from 10 to 100 bar (for VA 550) 0530 1115
High-pressure protection f. installation from 10 to 16 bar DVGW (for VA 550) 0530 1116
PNG cable screwing - standard 0553 0552
PNG cable screwing – for ATEX 0553 0551
   
VA 570 - Flow sensor with integrated measuring section  
  Order no.
VA 570 Flow sensor with integrated 1/2" measuring section 0695 0570
VA 570 Flow sensor with integrated 3/4" measuring section 0695 0571
VA 570 Flow sensor with integrated 1" measuring section 0695 0572
VA 570 Flow sensor with integrated 1 1/4" measuring section 0695 0573
VA 570 Flow sensor with integrated 1 1/2" measuring section 0695 0574
VA 570 Flow sensor with integrated 2" measuring section 0695 0575
       
VA 570 Flow sensor with integrated DN 15 measuring section with weld neck flange 0695 2570
VA 570 Flow sensor with integrated DN 20 measuring section with weld neck flange 0695 2571
VA 570 Flow sensor with integrated DN 25 measuring section with weld neck flange 0695 2572
VA 570 Flow sensor with integrated DN 32 measuring section with weld neck flange 0695 2573
VA 570 Flow sensor with integrated DN 40 measuring section with weld neck flange 0695 2574
VA 570 Flow sensor with integrated DN 50 measuring section with weld neck flange 0695 2575
VA 570 Flow sensor with integrated DN 65 measuring section with weld neck flange 0695 2576
VA 570 Flow sensor with integrated DN 80 measuring section with weld neck flange 0695 2577
   
Outer thread measuring section: Bestell-Code
A2 - NPT outer thread A2
   
Option display:  
B1 - with integrated display B1
B2 - without display B2
   
Option signal outputs / bus connection:  
C1 - 2x4...20mA analogue output galv. isolated, pulse output RS485 C1
C4 - 1x4…20mA analogue output (not galv. isolated), pulse output, RS 485 (Modbus RTU) C4
C5 -  Ethernet-Interface (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) C5
C7 - 2x4..20mA analogue output passive, pulse outp.RS485 (Mb-RTU) C7
C8 - E8 - M-Bus (Z6955504) C8
C9 - Ethernet-Interface PoE (Power over Ethernet) (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) C9
   
Calibration:  
D1 - no real gas calibration - gas adjustment via gas constant D1
D2 - real gas calibration in the selected gas type D2
Gas type:  
E1 - compressed air E1
E2 - Nitrogen (N2) E2
E3 - Argon (Ar) E3
E4 - Carbon dioxide (CO2) E4
E5 - Oxygen (O2) E5
E6 - Nitrous oxide (N2O) E6
E7 - Natural gas (NG) E7
E8 - Helium (He) - Real gas calibration required  E8
E9 - Propan (C3H8) - Real gas calibration required  E9
E10 - Methane (CH4) E10
E11 - Biogas (Methane 50% : CO2 50%) E11
E12 - Hydrogen (H2) - Real gas calibration required E12
E90 - Further gas E90
E91 - Gas mixture E91
   
Reference conditions:  
F1 - 20°C, 1000 hPa F1
F2 - 0°C, 1013,25 hPa F2
F3 - 15°C, 981 hPa F3
F4 - 15°C, 1013,25 hPa F4
   
Maximum pressure:  
G1 - 16 bar (Standard) G1
G2 - 40 bar (High pressure) - (not for DVGW approval) G2
   
Surface condition:  
H1 - Standard version H1
H2 - Special cleaning - oil and grease free (e.g. for oxygen) H2
H3 - LABS free and silicone free version, incl. oil and grease free H3
   
Accuracy class:  
I1 - ± 1.5% of measured value (standard) I1
I2 - ± 1 % of measured value (precision) I2
   
Maximum gas temperature at the sensor tip:  
J1 - up to 120°C gas temperature (only for ATEX - version) J1
J2 - up to 180°C gas temperature (not for ATEX - version) J2
   
Approvals:  
K1 - Non-explosive area - no approval K1
K2 - ATEX II 2G Ex d IIC T4 K2
K3 - DVGW approval (for natural gas) K3
R1 - Special measuring range R1
Further accessories:  
Connection cable for sensors 5 m with open ends 0553 0108
Connection cable for sensors 10 m with open ends 0553 0109
Ethernet connection cable length 5 m, M12 plug x-coded (8 poles) to RJ 45 plug 0553 2503
Ethernet connection cable length 10 m, M12 plug x-coded (8 poles) to RJ 45 plug 0553 2504
5 point precision calibration of new instrument with ISO certificate 3200 0001
Additional calibration point volume flow VA5xx serial, freely selectable 0700 7720
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007
PNG cable screwing - standard 0553 0552
PNG cable screwing – for ATEX 0553 0551
VA 500 - Flow sensor for compressed air and gases  
  Order no.
VA 500 flow sensor, with RS 485 interface (Modbus-RTU) with analogue output 4...20mA and pulse output (galvanically separated), standard version (92,7 m/s) 0695 5001
   
Measuring range:  
Max-version (185m/s) Z695 5003
High-Speed-Version (224 m/s) Z695 5002
   
Option display:  
with integrated display Z695 5000
without display  
   
Option signal output / bus connection:  
Standard  
Ethernet-Interface for VA500/VA520, FA500     Z695 5006
Ethernet-Interface PoE for VA500/VA520, FA500 Z695 5007
M-Bus (pulse output not available) Z695 5004
   
Mounting length / shaft length:  
220 mm ZSL0220
120 mm ZSL0120
160 mm ZSL0160
300 mm ZSL0300
400 mm ZSL0400
500 mm ZSL0500
600 mm ZSL0600
700 mm ZSL0700
   
Surface condition:  
Special cleaning - oil and grease free (e.g. for oxygen) 0699 4005
LABS free and silicone free version incl.cleaning oil and grease free 0699 4007
   
Gas type:  
Compressed air  
Nitrogen (N2)  
Argon (Ar)  
Carbon dioxide (CO2)  
Oxygen (O2)  
Nitrous oxide (N2O)  
Natural gas (NG)  
Helium (He) - Real gas calibration required  
Propane (C3H8) - Real gas calibration required  
Methane (CH4)  
Biogas (Methane 50% : CO2 50%)  
Hydrogen (H2) - Real gas calibration required  
Further gas  
Gas mixture  
   
Calibration:  
Real gas calibration in the selected gas type  
   
Special measuring range:  
Special measuring range freely selectable Z695 4006
   
Accuracy class:  
± 1 % of measured value (precision) Z695 5005
   
Further accessories:  
Ball valve I/I G 1/2" stainless steel 3300 0002
Welding neck, L = 35 mm male screw, R1/2",stainless steel 1.4301 3300 0006
Welding neck, L= 35 mm, male screw,  R1/2",stainless steel 1.44571 3300 0007
M12 – T plug for VA 500/520 to connect several sensors 020000823
   
Connection cables:  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120
Ethernet-connection cable length 5 m, M 12 plug x-coded (8 poles) to RJ45 0553 2503
Ethernet-connection cable length 10 m, M 12 plug x-coded (8 poles) to RJ45 0553 2504
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug,
lenght 5 m
0553 0106
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug,
lenght 10 m
0553 0107
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007
   
Mains units:  
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 0554 0109
External display, chart recorder DS 400 0500 4000
   
Calibration and adjustment:  
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010
5 point precision calibration of new instrument with ISO certificate 3200 0001
Real gas calibration 3200 0015
Real gas calibration for mixed gases on request
VA 520 - Flow sensor with integrated measuring section -
Screw-in thread
 
Stainless steel: 1,4301 Order no.
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525
Stainless steel: 1,4571  
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4571 0695 1520
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4571 0695 1521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4571 0695 1522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4571 0695 1523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4571 0695 1526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4571 0695 1524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4571 0695 1525
Outer thread measuring section of VA 520 with stainless steel 1,4571  
NPT outer thread C2
       
Option signal output / bus connection:  
Standard  
Ethernet-Interface für VA500/VA520, FA500 Z6955006
Ethernet-Interface PoE für VA500/VA520, FA500 Z6955007
M-Bus (pulse output not available) Z695 5004
   
Gas type:  
Compressed air  
Nitrogen (N2)  
Argon (Ar)  
Carbon dioxide (CO2)  
Oxygen (O2)  
Nitrous oxide (N2O)  
Natural gas (NG)  
Helium (He) - Real gas calibration required  
Propane (C3H8) - Real gas calibration required  
Methane (CH4)  
Biogas (Methane 50% : CO2 50%)  
Hydrogen (H2) - Real gas calibration required  
Further gas  
Gas mixture  
   
Calibration:  
Real gas calibration in the selected gas type  
   
Maximum pressure:  
40 bar (High-pressure)  Z695 0411
Surface condition:  
Special cleaning - oil and grease free (e.g. for oxygen) 0699 4005
LABS free and silicone free version incl.cleaning oil and grease free 0699 4007
   
Special measuring range:  
Special measuring range freely selectable Z695 4006
   
Accuracy class:  
± 1 % of measured value (precision) Z695 5005
   
Connection cables:  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120
Ethernet-connection cable length 5 m, M 12 plug x-coded (8 poles) RJ 45 plug 0553 2503
Ethernet-connection cable length 10 m, M 12 plug x-coded (8 poles) RJ 45 plug 0553 2504
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 5 m 0553 0106
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 10 m 0553 0107
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007
Closing cap for measuring section in aluminium 0190 0001
Closing cap for measuring section stainless steel 1.4404 0190 0002
M12 – T plug for VA 500/520 to connect several sensors 020000823
   
Mains units:  
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 0554 0109
External display, chart recorder DS 400 0500 4000
   
Calibration and adjustment:  
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010
5 point precision calibration of new instrument with ISO certificate 3200 0001
Real gas calibration 3200 0015
Real gas calibration for mixed gases on request
VA 520 - Flow sensor with integrated measuring section - weld neck flange  
  Order no.
VA520 Flow meter with integrated DN 15 measuring section with flange 0695 2521
VA520 Flow meter with integrated DN 20 measuring section with flange 0695 2522
VA520 Flow meter with integrated DN 25 measuring section with flange 0695 2523
VA520 Flow meter with integrated DN 32 measuring section with flange 0695 2526
VA520 Flow meter with integrated DN 40 measuring section with flange 0695 2524
VA520 Flow meter with integrated DN 50 measuring section with flange 0695 2525
VA520 Flow meter with integrated DN 65 measuring section with flange 0695 2527
VA520 Flow meter with integrated DN 80 measuring section with flange 0695 2528
   
Option signal output / bus connection:  
Standard  
Ethernet-Interface for VA500/VA520, FA500 Z695 5006
Ethernet-Interface PoE for VA500/VA520, FA500 Z695 5007
M-Bus (pulse output not available) Z695 5004
   
Gas type:  
Compressed air  
Nitrogen (N2)  
Argon (Ar)  
Carbon dioxide (CO2)  
Oxygen (O2)  
Nitrous oxide (N2O)  
Natural gas (NG)  
Helium (He) - Real gas calibration required  
Propane (C3H8) - Real gas calibration required  
Methane (CH4)  
Biogas (Methane 50% : CO2 50%)  
Hydrogen (H2) - Real gas calibration required  
Further gas  
Gas mixture  
   
Calibration:  
Real gas calibration in the selected gas type  
   
Maximum pressure:  
40 bar (High-pressure)  Z695 0411
   
Surface condition:  
Special cleaning - oil and grease free (e.g. for oxygen) 0699 4005
LABS free and silicone free version incl.cleaning oil and grease free 0699 4007
   
Special measuring range:  
Special measuring range freely selectable Z695 4006
   
Accuracy class:  
± 1 % of measured value (precision) Z695 5005
   
Connection cables:  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120
Ethernet-connection cable length 5 m, M 12 plug x-coded (8 poles) to RJ 45 0553 2503
Ethernet-connection cable length 10 m, M 12 plug x-coded (8 poles) to RJ 45 0553 2504
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug,
lenght 5 m
0553 0106
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 10 m 0553 0107
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007
Closing cap for measuring section in aluminium 0190 0001
Closing cap for measuring section stainless steel 1.4404 0190 0002
M12 – T plug for VA 500/520 to connect several sensors 20000823
   
Mains units:  
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 0554 0109
External display, chart recorder DS 400 0500 4000
   
Calibration and adjustment:  
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010
5 point precision calibration of new instrument with ISO certificate 3200 0001
Real gas calibration 3200 0015
Real gas calibration for mixed gases on request
Flow measurement DS 400 for compressed air and gases  
  Order no.
Flow station DS 400 for installation into existing pipelines consisting of: 0601 4006
consisting of:  
Chart recorder DS 400 and flow sensor VA 500 in standard version (92,7 m/s),
Sensor length 220 mm
 
   
Options for chart recorder DS 400:  
Integrated data logger for 100 million measured values Z500 4002
Integrated Ethernet and RS 485 interface Z500 4004
External Gateway PROFIBUS for RS 485 interface connection Z500 3008
External Gateway PROFINET for RS 485 interface connection Z500 3009
2 additional sensor inputs for analogue sensors (pressure sensors, temperature sensors etc.) Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003
Integrated webserver Z500 4005
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels Z500 4007
Option "Totalizer function for analogue signals" Z500 4006
   
VA 500 Verbrauchssensor, mit RS 485 (Modbus-RTU) Schnittstelle, mit Analogausgang 4...20mA und Impulsausgang (galvanisch getrennt) 0695 5001
Max. Version (185 m/s) Z695 5003
High Speed Version (224 m/s) Z695 5002
Display Z695 5000
M-Bus (pulse output not available) Z695 5004
Sensor length 120 mm ZSL 0120
Sensor length 160 mm ZSL 0160
Sensor length 220 mm ZSL 0220
Sensor length 300 mm ZSL 0300
Sensor length 400 mm ZSL 0400
Sensor length 500 mm ZSL 0500
Sensor length 600 mm ZSL 0600
Sensor length 700 mm ZSL 0700
Ball valve I/I G 1/2" stainless steel 3300 0002
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007
M12 – T plug for VA 500/520 to connect several sensors 020000823
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010
Oil and fat free, special cleaning   0699 4005
5 point precision calibration of new instrument with ISO certificate 3200 0001
Real gas calibration 3200 0015
Real gas calibration for mixed gases on request
   
Further accessories:  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040
   
Calibration and adjustment:  
5 point precision calibration including ISO certificate 3200 0001
DS 400 - Chart recorder      
  Order no.
Product sensor-
input 1+2
sensor-
input 3+4
 
Chart recorder DS400 - with 3.5“ graphic display – easy operation with touch screen digital  ---------- 0500 4000 D
digital digital 0500 4000 DD
digital analogue 0500 4000 DA
analogue  ---------- 0500 4000 A
analogue analogue 0500 4000 AA
   
Options:  
Integrated data logger for 100 Mio. measured values Z500 4002
Integrated Ethernet- and RS 485 interface Z500 4004
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...) Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003
External Gateway PROFIBUS for RS 485 interface connection Z500 3008
External Gateway PROFINET for RS 485 interface connection Z500 3009
Integrated webserver Z500 4005
"Mathematics calculation function" for 4 freely selectable channels,
(virtual channels): addition, subtraction, division, multiplication
Z500 4007
"Totalizer function for analogue signals" Z500 4006
   
Further accessories:  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040
CS Soft Network - Database Client/Server Solution (up to 5 DS 400) - 0554.7041
database (MySQL) to Server - data evaluation via Client-Software
0554 7041
CS Soft Network - Database Client/Server Solution (up to 10 DS 400) - 0554.7042
database (MySQL) to Server - data evaluation via Client-Software
0554 7042
CS Soft Network - Database Client/Server Solution (up to 20 DS 400) - 0554.7043
database (MySQL) to Server - data evaluation via Client-Software
0554 7043
CS Soft Network - Database Client/Server Solution (> 20 DS 400) - 0554.7044
database (MySQL) to Server - data evaluation via Client-Software
0554 7044
Software Support / h 9999 9998
Ready for plug in and parametrization 0990 0010
Everything ready for plug in 0990 0011
Flow sensor VA 500      
  Order no.
VA 500 flow sensor, with RS 485 interface (Modbus-RTU), with analogue output 4...20mA and pulse output (galvanically separated) 0695 5001
Max. Version (185 m/s) Z695 5003
HighSpeed version (224 m/s) Z695 5002
Display Z695 5000
M-Bus (pulse output not available) Z695 5004
Sensor length 120 mm ZSL 0120
Sensor length 160 mm ZSL 0160
Sensor length 220 mm ZSL 0220
Sensor length 300 mm ZSL 0300
Sensor length 400 mm ZSL 0400
Sensor length 500 mm ZSL 0500
Sensor length 600 mm ZSL 0600
Sensor length 700 mm ZSL 0700
Ball valve I/I G 1/2" stainless steel 3300 0002
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007
M12 – T plug for VA 500/520 to connect several sensors 20000823
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010
Oil and fat free, special cleaning   0699 4005
5 point precision calibration of new instrument with ISO certificate 3200 0001
Real gas calibration 3200 0015
Real gas calibration for mixed gases on request
Flow sensor VA 520 with integrated measuring section  
  Order no.
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525
Option:  
M-Bus (pulse output not available) Z695 5004
   
Connection cables:  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120
   
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease 3200 0010
Option: special cleaning 0699 4005
5 point precision calibration with ISO certificate  3200 0001
Real gas calibration 3200 0015
Real gas calibration for mixed gases on request
Further accessories:  
Closing cap for measuring section in aluminium 0190 0001
Closing cap for measuring section stainless steel 1.4404 0190 0002
M12 – T plug for VA 500/520 to connect several sensors 020000823
Flow measurment VA 500/ VA 520 for below gases  
  Order no.
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request
Dew point sensors FA 510      
  Order no.
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0510
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0512
Measuring chamber with inner threat G1/2" and mounted male coupling DN 7,2
for quick-lock coupling
0699 3390
More measuring chambers please see on catalogue page 60  
Connection cables for VA/FA sensors      
  Order no.
Connection cable for VA/FA, 5 m with M12 plug 0553 0104
Connection cable for VA/FA, 10 m with M12 plug 0553 0105
Connection cable for VA/FA, 20 m with M12 plug 0553 0120
Pressure sensors      
  Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554
Precision pressure sensorCS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % 0694 3549
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request
Temperature sensors      
  Order no.
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201
Outdoor temperature probe, PT 100 class B (2-wire) in wall housing
(82x55x33 mm), temperature range: -50°C to +80°C
0604 0203
Indoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm),
temperature range: -50°C to +80°C
0604 0204
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201
Connection cables for pressure/temperature sensors  
  Order no.
Connection cable for sensors 5 m, with open ends 0553 0108
Connection cable for sensors 10 m, with open ends 0553 0109
Clamp-on meters      
  Order no.
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends 0554 0510
Clamp-on ammeter 0…1000 A RMS, 4…20 mA = 0…1000 A, 10-30 VDC, 3 m connection cable with open ends 0554 0518
Calibration certificate for clamp-on ammeters, 5 calibration points  0554 3333
CS ENERIUM 30 Current/effective power meter for panel mounting  
  Order no.
CS ENERIUM 30 Current/effective power meter for panel mounting,
with RS 485 interface
0554 5355
Current transformer 100/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5344 
Current transformer 200/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5345
Current transformer 300/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5346
Current transformer 500/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5347
Current transformer 600/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5348
Current transformer 1000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)
0554 5349 
Current transformer 2000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)
0554 5350
   
Connection cable CS ENERIUM 30  
Connection cable for sensors 5 m, with open ends 0553 0108
Connection cable for sensors 10 m, with open ends 0553 0109
Connection cable variable length, open ends on both sides 0553 0126
VA 409 Flow direction switch for compressed air systems  
  Order no.
Flow direction switch VA 409 0695 0409
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110
Connection cable VA/FA Series 400, 5 m with M12 plug 0553 0104
Connection cable VA/FA Series 400, 10 m with M12 plug 0553 0105
Measuring sections of stainless steel 1.4301 incl. ball valve  
Up to DN 65 (G2 1/2”) with external thread, from DN 80 with weld neck flange according to DIN 2633 Order no.
Measuring section G 1/2” 21.3 x 2.6 mm 500 mm 4000 0015
Measuring section G 3/4” 26.9 x 2.6 mm 600 mm 4000 0020
Measuring section G 1” 33.7 x 3.2 mm 750 mm 4000 0025
Measuring section G 1 1/4” 42.4 x 3.2 mm 900 mm 4000 0032
Measuring section G 1 1/2” 48.3 x 3.2 mm 1000 mm 4000 0040
Measuring section G 2” 60.3 x 3.6 mm 1250 mm 4000 0050
Measuring section G 2 1/2” 76.1 x 3.6 mm 1500 mm 4000 0065
Measuring section DN 80/88.9 88.9 x 2.0 mm 1850 mm 4000 0080
Measuring section DN 100/114.3 114.3 x 2.0 mm 2104 mm 4000 0100
Measuring section DN 125/139.7 139.7 x 3.0 mm 2860 mm 4000 0125
Measuring section DN 150/168,3 168,3 x 3,0 mm 3110 mm 4000 0150
Accessories:  
Drilling jig incl. drill (Ø 13 mm) 0530 1108
High-pressure protection f. installation from 10 to 50 bar (for VA400/500) 0530 1105
High-pressure protection f. installation from 10 to 100 bar (for VA 550) 0530 1115
High-pressure protection f. installation from 10 to 16 bar DVGW (for VA 550) 0530 1116
Drilling clamp incl. ball valve 1/2"   
  Order no.
Spot drilling collar for pipe diameter 032 - 036 mm, length: 100 mm 0500 0446
Spot drilling collar for pipe diameter 036 - 040 mm, length: 100 mm 0500 0448
Spot drilling collar for pipe diameter 040 - 044 mm, length: 150 mm 0500 0449
Spot drilling collar for pipe diameter 044 - 051 mm, length: 200 mm 0500 0610
Spot drilling collar for pipe diameter 048 - 055 mm, length: 200 mm 0500 0611
Spot drilling collar for pipe diameter 052 - 059 mm, length: 200 mm 0500 0612
Spot drilling collar for pipe diameter 057 - 064 mm, length: 200 mm 0500 0613
Spot drilling collar for pipe diameter 063 - 070 mm, length: 200 mm 0500 0614
Spot drilling collar for pipe diameter 070 - 077 mm, length: 200 mm 0500 0615
Spot drilling collar for pipe diameter 075 - 083 mm, length: 200 mm 0500 0616
Spot drilling collar for pipe diameter 082 - 090 mm, length: 200 mm 0500 0617
Spot drilling collar for pipe diameter 087 - 097 mm, length: 200 mm 0500 0618
Spot drilling collar for pipe diameter 095 - 104 mm, length: 200 mm 0500 0619
Spot drilling collar for pipe diameter 102 - 112 mm, length: 200 mm 0500 0620
Spot drilling collar for pipe diameter 108 - 118 mm, length: 200 mm 0500 0621
Spot drilling collar for pipe diameter 118 - 128 mm, length: 200 mm 0500 0622
Spot drilling collar for pipe diameter 125 - 135 mm, length: 200 mm 0500 0623
Spot drilling collar for pipe diameter 133 - 144 mm, length: 200 mm 0500 0624
Spot drilling collar for pipe diameter 145 - 155 mm, length: 250 mm 0500 0625
Spot drilling collar for pipe diameter 151 - 161 mm, length: 250 mm 0500 0626
Spot drilling collar for pipe diameter 159 - 170 mm, length: 250 mm 0500 0627
Spot drilling collar for pipe diameter 168 - 180 mm, length: 250 mm 0500 0628
Spot drilling collar for pipe diameter 180 - 191 mm, length: 250 mm 0500 0629
Spot drilling collar for pipe diameter 193 - 203 mm, length: 300 mm 0500 0630
Spot drilling collar for pipe diameter 200 - 210 mm, length: 300 mm 0500 0631
Spot drilling collar for pipe diameter 209 - 220 mm, length: 300 mm 0500 0632
Ball valve G 1/2"  I - R 1/2"O 0500 3009
Thickness meter CS 0495        
  Order no.
Thickness meter CS 0495, incl. case and calibration block 0560 0495
Re-calibration (not discountable)      
  Order no.
Re-calibration and 5 point precision alignment of consumption sensor with ISO certificate 0695 3333
Real gas calibration 3200 0015
Real gas calibration for mixed gases on request
OIL-Check & Particle counter PC 400      
Stationary solution DS 500 Order no. 
DS 500 – intelligent chart recorder in basic version (4 sensor inputs) 0500 5000
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places 0554 8040
Residual oil measurement:
OIL-Check 400 – residual oil content measurement of the vaporous residual oil content from 0.001…2,5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration, without integrated display, with analogue output 0…10 Volt for connection to an external chart recorder.
0699 0070
Sampling system OIL-Check 400:
Sampling system consisting of ½“ ball valve  (oil- and grease-free), 1 m stainless steel tube   6x1 mm (oil- and grease-free), clamp screwing (oil- and grease-free)
Z699 0075
Alternative:
Portable sampling system consisting of 2 m PTFE hose, quick-lock coupling
(oil- and grease-free)
Z699 0074
Options for systems > 16 bar:
Pressure reducer (oil- and grease-free), input pressure max. 300 bar, output pressure up to 10 bar
Z699 0076
Connection cable for probes, 5 m with open ends 0553 0108
PC 400 particle counter up to 0.1 µm for compressed air and gases, incl. pressure reducer/sampling hose/ calibration certificate, Modbus-RTU interface 0699 0040
Connection cable for probes, 5 m with open ends 0553 0108
FA 510 dew point sensor for adsorption driers -80°...20°Ctd  incl.  inspection  certificate,
4...20  mA analogue output (3-wire technology) and Modbus-RTU interface
0699 0510
Standard measuring chamber up to 16 bar 0699 3390
Connection cable for VA/FA Series, 5  m 0553 0104
   
Mobile solution with DS 500 mobile, OIL-Check 400, PC 400, FA 510 Bestell-Nr. 
DS 500 mobile - intelligent chart recorder with 4 sensors inputs 0500 5012
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places 0554 8040
Residual oil measurement:
OIL-Check 400 – residual oil measurement of the vaporous residual oil content from 0.001…2.5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration, without integrated display, with analogue output 0…10 Volt for connection to external chart recorders
0699 0070
Mobile transport trolley including roles (outer dimensions: 1.0 x 0.7 x 0.35 m
(W x H x D)  with firmly mounted components of OIL-Check 400, PC 400, FA 510
0554 6017
Mobile sampling system consisting of  2 m PTFE hose, quick lock coupling (oil- and grease-free) Z699 0074
Connection cable for pressure, temperature, third party sensors to portable devices, 
ODU / open ends, 5 m
0553 0501
PC 400 particle counter up to 0.1 µm for compressed air and gases, incl.
pressure reducer/sampling hose, calibration certificate, Modbus-RTU interface
0699 0040
Connection cable for probes, 5 m with open ends 0553 0501
FA 510 dew point sensor, -80°...+20°Ctd, incl. mobile measuring chamber and 5 m connection cable to portable devices  0699 1510
   
OIL-Check 400 – stationary solution with DS 400 Order no. 
OIL-Check 400 – residual oil content measurement of the vaporous residual oil content from 0.001…2,5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration, without integrated display, with analogue output 0…10 Volt for connection to an external chart recorder 0699 0070
Option: DS 400 chart recorder integrated in the OIL-Check 400 Z699 0071
Sampling OIL-Check 400:
Sampling system consisting of ½“ ball valve  (oil- and grease-free), 1 m stainless steel tube   6x1 mm (oil- and grease-free), clamp screwing (oil- and grease-free)
Z699 0075
Alternative:
Portable sampling system consisting of 2 m Teflon hose, quick-lock coupling (oil- amnd gas free)
Z699 0074
Options for systems > 16 bar:
Pressure reducer (oil- and grease-free), input pressure max. 300 bar, output pressure up to
10 bar
Z699 0076
Optionen for DS 400: Bestell-Nr. 
Option: Integrated data logger for 100 million measured values Z500 4002
Option: Integrated Ethernet and RS 485 interface Z500 4004
Option: Integrated Webserver Z500 4005
Option: 2 additional sensor inputs for analogue sensors (pressure sensors, temperature sensors and so on) Z500 4001
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places 0554 8040
   
OIL-Check 400 portable solution with handle Order no. 
OIL-Check 400 – residual oil measurement of the vaporous residual oil content from 0.001…2.5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration. Without integrated display, with alarm output 0…10 Volt for connection to external chart recorder 0699 0070
Option: DS 400 chart recorder integrated in the OIL-Check 400 Z699 0071
Option: Handle and pedestal for mobile use of the OIL-Check 400  Z699 0072
Alternative:  
Option: Flight case for OIL-Check 400 Z699 0073
Option: Mobile sampling system consisting of 2 m PTFE hose, quick lock coupling (oil- and grease-free) Z699 0074
Optionen for DS 400:  
Option: Integrated data logger for 100 million measured values Z500 4002
Option: Integrated Ethernet and RS 485 interface Z500 4004
Option: Integrated Webserver Z500 4005
Option: 2 additional sensor inputs for analogue sensors (pressure sensors,  temperature sensors and so on) Z500 4001
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places 0554 8040
   
Descreption Order no. 
Replacement unit OIL-Check for the period of re-calibration 0699 3910
Replacement unit OIL-Check incl. DS 400 for the period of re-calibration 0699 3920
Re-calibration OIL-Check incl. Certificate 0699 3301
Re-calibration and maintenance OIL-Check incl. certificate, rate 1 for up to 8760 hours of operatio 0699 3302
Re-calibration and maintenance OIL-Check incl. certificate, rate 2 for over 8760 hours of operation 0699 3303
   
LD 500/510 leak detector      
  order-no.
Set LD 500 0601 0105
consisting of:  
LD 500 leak detector with acoustic trumpet, and integrated camera,
100 leak tags for marking the leakages on site
0560 0105
Transportation case 0554 0106
Sound-proof headset 0554 0104
Focus tube with focus tip 0530 0104
AC adapter plug 0554 0009
Helix cable for connecting the ultrasonic sound sensor 02000 1402
   
Set LD 510 0601 0106
consisting of:  
LD 510 leak detector incl. acoustic trumpet, with integrated camera and additional input forexternal sensors, 100 leak tags for marking the leakages on site 0560 0106
Transportation case 0554 0106
Sound-proof headset 0554 0104
Focus tube with focus tip 0530 0104
AC adapter plug 0554 0009
Helix cable for connecting the ultrasonic sound sensor 02000 1402
Equipment:  
CS Leak Reporter – for detailed ISO 50001 reports.
Gives an illustrated survey of the found leakages and their possible savings. Measures for elimination including status display can be defined for every leakage.
0554 0105
Gooseneck for leakage detection at sites which are difficult to access 0530 0105
Parabolic mirror for leak detection at long distances 0530 0106
Ultrasonic tone generator for leak testing 0554 0103
500 leak tags for marking the leakages on site 0530 0107
Calibration:  
Recalibration LD 500/LD510 inclusive certificate 0560 3333
Further sensors / accessories for connection to LD 510:  
FA 510 dew point sensor for mobile devices, -80…+20°Ctd,
incl. mobile measuring chamber, 5m connection cable and perforated protection cap
0699 1510
Flow sensor VA 500, Max version (185 m/s) sensor length 220 mm, incl. 5 m
connection cable
0695 1124
Standard pressure sensor CS 16, 0…16 bar, ± 1 % accuracy of f. s 0694 1886
Differential pressure sensor 1.6 bar diff. 0694 3561
Connection cable for pressure, temperature or external sensors on mobile instruments,    ODU /open ends, 5 m  0553 0501
CS Basic 2018 - data evaluation in graphic and table form - reading out of the measured data via USB Stick or Ethernet. License for 2 computers 0554 8040
LD 400 Leak detector       
  Order no.
Set LD 400 leak detector 0601 0104
consisting of:  
LD 400 Leak detector 0560 0104
Transport case 0554 0106
Sound-proof headset 0554 0104
Focus tube with focus tip 0530 0104
Battery charger 0554 0009
Acoustictrumpet 0530 0109
Accessory, not included in the set:  
Ultrasonic tone generator 0554 0103
   
Affordable differential pressure sensor for testing filter performance  
  Order no.
Differential Pressure Sensor 1.6 bar diff 0694 3561
       
Connection cables:  
Connection cable for sensors 5 m with open ends 0553 0108
Connection cable for sensors 10 m with open ends 0553 0109
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502
   
For mobile measurements in a set with PI 500:  
PI 500 portable measuring instrument with integrated data logger 0560 0511
Differential Pressure Sensor 1.6 bar diff 0694 3561
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU / open ends, 5 m 0553 0501
   
For stationary measurements in a set with DS 52:  
DS 52 LED display in wall housing 0500 0009
Differential Pressure Sensor 1.6 bar diff 0694 3561
Connection cable for sensors 5 m with open ends 0553 0108
DS 52 – Digital process meter      
  Order no.
DS 52 LED display in wall housing 0500 0009
   
Options:  
Supply 24 VDC instead of 230 VAC Z500 0001
Supply 110 VAC instead 230 VAC Z500 0002
Alarm unit mounted at wall housing Z500 0003
Alarm unit for external mounting Z500 0004
DS 52 – all-in one set for pressure monitoring /alerting,
consisting of DS 52 LED display and pressure sensor 0...16 bar
on request
DS 52 – all-in one set for temperature monitoring /alerting,
consisting of DS 52 LED display and screw-in temperature probe -50...+500°C
on request
DS 51 – Digital panel meter      
  Order no.
DS 51 – digital meter for panel mounting, supply 230 VAC,
sensor input for 0(4)...20 mA signal, 2 alarm relays
0500 0006
Options:  
Supply 24 VDC instead of 230 VAC Z500 0001
Supply 110 VAC instead of 230 VAC Z500 0002
Re-Calibration and service (not discountable)  
  Order no.
Re-calibration and precision alignment 0699 3333
Additional calibration point pressure dew point 0700 7710
Re-calibration and 5 point precision alignment of flow sensor with ISO certificate 0695 3333
Replacement unit for the period of re-calibration 0699 3900
Dew point meter in exchange with calibration certificate from our instrument pool 0699 3990
Flow sensor with calibration certificate from our instrument pool 0695 3990
Re- calibration Oil Check with Certificate 0699 3301
Re- calibration and maintenance Oil Check, with Certificate, rate 1 up to 8760 hours of operation 0699 3302
Re- calibration and maintenance Oil Check, with Certificate, rate 2 over 8760 hours of operation 0699 3303
Replacement unit OIL-Check for the period of re-calibration 0699 3910
Replacement unit OIL-Check with DS 400 for the period of re-calibration 0699 3920
Re- calibration particle counter PC 400 with Certificate 0699 3304
Products not included in the catalogue:  
FA 540 dew point sensor with same pinning at M12 plug as
FA 410
 
FA 540 dew point sensor for desiccant driers -80...20°Ctd incl. inspection certificate,
4…20 mA output signal (3-wire connection) 
0699 0540
FA 540 dew point sensor for refrigeration driers -20...50°Ctd incl. inspection certificate,
4…20 mA output signal (3-wire connection) 
0699 0542
   
Connection cables:  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105
       
Options for FA 540:  
Option max. pressure FA5xx 350 bar Z699 0515
Option special scaling FA5xx, 4…20 mA=__ … __ g/m³, ppm etc. Z699 0514
Option connection thread FA5xx, 5/8" UNF Z699 0511
Option surface condition FA5xx, free of oil & grease Z699 0517
       
Additional accessories:  
Standard measuring chamber up to 16 bar 0699 3390
High pressure measuring chamber up to 350 bar 0699 3590
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110
CS Service software incl. PC connection set for FA540/545 sensors 0554 2008
       
Calibration and adjustment:  
Precision calibration at 3°Ctd including ISO certificate 0699 3396
Additional calibration point, freely selectable 0700 7710
FA 545 dew point sensor with same pinning at M12 plug as
FA 415
 
FA 545 dew point sensor for refrigeration driers -20...50°Ctd incl. inspection certificate,
4…20 mA output signal (2-wire connection) 
0699 0547
FA 545 dew point sensor for desiccant driers -80...20°Ctd incl. inspection certificate,
4…20 mA output signal (2-wire connection) 
0699 0545
   
Connection cables:  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105
       
Options for FA 545:  
Option max. pressure FA5xx 350 bar Z699 0515
Option special scaling FA5xx, 4…20 mA=__ … __ g/m³, ppm etc. Z699 0514
Option connection thread FA5xx, 5/8" UNF Z699 0511
Option surface condition FA5xx, free of oil & grease Z699 0517
   
Additional accessories:  
Standard measuring chamber up to 16 bar 0699 3390
High pressure measuring chamber up to 350 bar 0699 3590
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110
CS Service software incl. PC connection set for FA540/545 sensors 0554 2008
       
Calibration and adjustment:  
Precision calibration at 3°Ctd including ISO certificate 0699 3396
Additional calibration point, freely selectable 0700 7710
       
       
Re-calibration , services, oilcheck and particle counter parts are not discountable.  
       
All prices are net prices valid until 31th December 2019,
shipping costs are not included.
Payment 30 days net
       
CS INSTRUMENTS GmbH & Co. KG
SALES OFFICE SOUTH
Zindelsteiner Straße 15
D-78052 VS-Tannheim
Fon: +49 (0) 7705 97 89 9-0
Fax: +49 (0) 7705 97 89 9-20
CS INSTRUMENTS GmbH & Co. KG
SALES OFFICE NORTH
Am Oxer 28c
D-24955 Harrislee
Fon: +49 (0) 461 80 71-50
Fax: +49 (0) 461 80 71-15
mailto:info@cs-instruments.com      
https://www.cs-instruments.com      
"errors excepted"